Building Regulations 2010: Approved Documents L1A (draft) Conservation of fuel and power in new dwellings (2014 edition) (draft)

Publication Year

2014

Document Status

Withdrawn

Abstract

Provides guidance for complying with energy efficiency requirements in new dwellings and covers: five criteria for compliance, calculating the CO2 emission rate for the dwelling to ensure it does not exceed target CO2 emission rates, setting minimum energy efficiency standards for building fabric and services, how to reduce the risk of overheating in dwellings, procedures to ensure performance is as designed, information to be provided for the occupier and procedures for notifying building control.

Document History

For use in Wales. This is a draft copy and should not be used in place of DCLG Conservation of fuel and power in new dwellings (2010 edition incorporating further 2010 amendments). The Approved Documents current on 31 December 2011 will continue to apply to Wales. As guidance is reviewed and changes made the Welsh Government will publish separate documents. Comes into effect 31 July 2014 Main changes in the 2014 edition: This approved document, Approved Document L1A: Conservation of fuel and power in new dwellings supports the energy efficiency requirements of the Building Regulations. Regulation 2(1) of the Building Regulations defines the energy efficiency requirements as the requirements of regulations 23, 25A, 25B, 26, 26B, 28, 29 and 40 and Part L of schedule 1. It takes effect on 31 July 2014 and is for use in Wales. The 2010 edition will continue to apply to work begun before 31 July 2014, or to work subject to a building notice, full plans application or initial notice submitted before 31 July 2014. The main changes in the approved document are that: a new requirement, regulation 26B, has been introduced that requires new dwellings to achieve or better target fabric performance values. The Part L 2014 specifications have been strengthened to deliver 8% carbon dioxide savings across the new homes build mix relative to Part L 2010. A new elemental specification for new dwellings has been introduced for the purpose of target setting. A summary of the Part L 2014 elemental specification is published at Table B1 in the Approved Document. If the actual dwelling is constructed entirely to the elemental specification it will typically meet the carbon dioxide target and the limiting values for individual fabric elements and building services. The document consolidates the amendments made in SI 2013/747 requiring the feasibility of high efficiency alternative systems to be taken into account before construction commences. The guidance for insulation of circulation pipes within communal spaces is given greater prominence. The document is in a new style format.

Publisher Information