BS EN 1452-3:1999 Plastics piping systems for water supply - unplasticized poly (vinyl chloride) (PVC-u). Fittings (incorporating corrigenda July 2000, October 2000 and August 2009) (Withdrawn)

Publication Year

1999

Document Status

Withdrawn

Abstract

Specifies characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems in the field of water supply. Applicable to PVC-U fittings and to joints with components of PVC-U, other plastics and non-plastics materials intended to be used for water mains and services buried in ground as well as conveyance of water above ground for both outside and inside buildings for the supply of water under pressure at approximately 20°C (cold water) intended for human consumption and for general purposes.

Document History

Collectively parts 1 to 5 of BS EN 1452 supersede BS 3505:1986, BS 4346-1:1969 and BS 4346-2:1970. Since those British Standards are the basis of piping systems with a design life of at least 50 years, it is intended that they will be declared obsolescent by 26/6/2001. These parts also partially supersede BS 4346-3:1982. AMD 11012 is Corrigendum No.1. dated July 2000 - Indicated by a sideline. AMD 12006 is Corrigendum No.2. dated October 2000 - Correction to National foreword supersession details. Amendment dated 31 August 2009 - Correction to National foreword supersession details, and alignment of BSI and CEN publication details. Superseded by BS EN ISO 1452-3:2009.

ISBN

9780580681752

Publisher Information