BS EN 274-2:2002 Waste fitting for sanitary appliances. Test methods (AMD Corrigendum 14957)
Publication Year
2002
Document Status
Current
Abstract
Gives test methods for the requirements of waste outlets, traps and overflows.
Document History
Supersedes BS EN 274:1993, BS EN 329:1997, BS EN 411:1995, BS 3380:1982 and BS EN 3943:1979. WARNING. Incorrect use of products conforming to this standard in a UK waste water system could result in a health hazard. To be used satisfactorily with traditional UK installations which have 1 ¼'',1 ½ '' and 2'' Imperial-sized threaded outlets, the internal diameter of the threaded end of the waste outlet should be not less than 36mm, 41.7mm or 51.9mm respectively, this to extend for a least 7mm from the threaded end of the waste outlet. Amendment 14957 is Corrigendum No.1 dated 16 February 2004 - Correction to title and revision of national foreword.
ISBN
0580403378
Publisher Information
British Standards Institution
With over 100 years of experience the British Standards Institute is recognised as the UK’s National standards body. Their committees work with the manufacturing and service industries, government, businesses and consumers to facilitate the production of British, European and International standards.
389 Chiswick High Road
London
BSI
UK
Website: http://www.bsi-global.com/
Email: cservices@bsi-global.com
Tel: 020 8996 9000
