BS EN 1452-2:1999 Plastics piping systems for water supply - unplasticized poly (vinyl chloride) (PVC-u). Pipes (incorporating corrigenda July 2000, October 2000, August 2009 and November 2009) (Withdrawn)

Publication Year

1999

Document Status

Withdrawn

Abstract

Specifies the characteristics of pipes made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems in the field of water supply. Also specifies the test parameters for the test methods referred to in this standard. Applicable to extruded PVC-U pipes without a socket and pipes with a socket (integral or not), intended to be used for: water mains and services buried in ground; conveyance of water above ground for both outside and inside buildings; for the supply of water under pressure at approximately 20°C (cold water) intended for human consumption and for general purposes. Also applicable to pipes for the conveyance of water up to and including 45°C. Covers a range of pipe sizes and pressure classes and gives requirements concerning colours.

Document History

Collectively parts 1 to 5 of BS EN 1452 supersede BS 3505:1986, BS 4346-1:1969 and BS 4346-2:1970. Since those British Standards are the basis of piping systems with a design life of at least 50 years, it is intended that they will be declared obsolescent by 26/6/2001. These parts also partially supersede BS 4346-3:1982. AMD 10999 is Corrigendum No.1. dated July 2000 - Indicated by a sideline. AMD 12005 is Corrigendum No.2. dated October 2000 - Correction to National foreword supersession details. Amendment dated 31 August 2009 - Correction to National foreword supersession details, and alignment of BSI and CEN publication dates. Amendment dated 30 November 2009 - Replacement of core text with corrected version. Superseded by BS EN ISO 1452-2:2009.

ISBN

9780580694622

Publisher Information